Resurfacer bags, volume and coverage for a thin concrete overlay. Enter the slab size and thickness, pick your product, and get a bag count with waste included.
Materials planning only. Resurfacer sticks only to sound, clean, bare concrete, and the product data sheet governs preparation, mixing and curing.
Concrete overlay calculator
A 20 by 15 ft slab at 1/8 in thick needs 10 bags of 40 lb resurfacer and 3.13 cubic feet of mixed material with 10 percent waste. The calculator above works out the same shopping list for any slab: area times thickness, divided by the maker bag yield, with waste added.
How to use
- Enter the slab length and width.
- Enter the overlay thickness in inches or millimetres.
- Pick your resurfacer product: 40 lb bags or 50 lb pails.
- Read the bag count, the volume and the coverage per bag.
Formula
Volume = area x thickness; bags = volume with waste / bag yield. One 40 lb bag of Sakrete Flo-Coat covers 72 ft2 at 1/16 in, which is 0.375 ft3 of mixed material, and one 50 lb pail covers 90 ft2 at 1/16 in, which is 0.469 ft3. Coverage halves every time the thickness doubles, so one 40 lb bag covers about 36 ft2 at 1/8 in and 18 ft2 at 1/4 in.
Practical tips
- Measure the real thickness, not the thinnest spot. Low spots and dips take more material, and a thin average hides them. Walk the slab and measure in several places.
- Prep decides whether it sticks. Pressure wash, repair spalled spots, and never apply resurfacer over paint, sealer or loose concrete, or it will peel off with the first frost.
- Over 1/2 in is not a resurfacer job. Bagged resurfacers stop at 1/2 in thick. Thicker than that needs standard concrete, so use the slab calculator for a bonded overlay instead.
- Work in cool weather if you can. Hot sun dries a thin coat before it bonds. Follow the data sheet for temperature limits and curing.
Frequently asked questions
How many bags of resurfacer do I need?
Divide your overlay volume by the bag yield: 0.375 ft3 per 40 lb bag. A 20 by 15 ft slab at 1/8 in needs 10 bags with 10 percent waste.
How thick can a concrete overlay be?
Bagged resurfacers go from a feather edge to 1/2 in thick. Thicker than 1/2 in needs standard concrete, not resurfacer.
Does resurfacer stick to old concrete?
Yes, if the old concrete is sound, clean and bare. Paint, sealer, oil and loose concrete must come off first, or the bond will fail.
Can I resurface a driveway?
Yes, with a resurfacer rated for vehicle traffic and the right thickness, but a badly cracked or moving slab should be replaced, not resurfaced.
More in the concrete calculator hub, including self levelling compound, slabs and sealer.