Bricks, mortar, cement bags and sand for a brick wall. Enter the wall size, pick single or double skin, deduct doors and windows, and get an order quantity with waste included.
Materials planning only. This tool does not check wall stability, piers, footings or structural design. Tall or free standing walls need proper design.
Brick calculator
A 6 by 1.5 m single skin garden wall needs 587 bricks, 3 bags of cement and 0.30 tonnes of sand with 10 percent waste. The calculator above works out the same shopping list for any wall: standard UK bricks at 59.26 per square metre per skin, mortar by volume, and cement and sand split by your chosen mix.
How to use
- Enter the wall length and height.
- Pick single skin for a half brick garden wall, or double skin for a one brick wall.
- Deduct doors and windows: add up their areas in square metres and enter the total.
- Pick your mortar mix and cement bag size, then read the bricks, cement bags and sand.
Formula
Bricks = wall area x 59.26 per m2 x skins. A standard UK brick is 215 x 102.5 x 65 mm, and with a 10 mm joint each brick covers 225 x 75 mm of wall face, which is 59.26 bricks per square metre, rounded to 60 in the trade. Mortar = bricks x 0.0003 m3, plus a 0.010 m3 per m2 collar joint for a double skin. Dry mortar = wet volume x 1.33, split by the cement to sand ratio, with cement at 1,440 kg per m3 and sand at 1,600 kg per m3.
Practical tips
- Count courses before you order. Each course is 75 mm high with its joint, so a 1.5 m wall is 20 courses. Counting courses catches a wrong height early.
- Single skin suits low walls only. Above about 1 m, or for any free standing wall, use piers every 2 to 3 m and a proper footing, or build double skin.
- Order the waste, not the net count. Bricks break in transit and get cut wrong. Ten percent covers a plain rectangle; detailed work with lots of cuts needs more.
- Match the mix to the job. A 1:4 mix suits general and external brickwork, 1:6 suits sheltered internal work, and 1:3 is the strong mix for exposed or load bearing spots.
Frequently asked questions
How many bricks do I need per square metre?
About 60 standard UK bricks for a single skin wall, or about 120 for a double skin wall, based on 10 mm mortar joints.
How much mortar does brickwork need?
About 0.0003 m3 of wet mortar per brick, plus a collar joint for double skins. The calculator turns that into cement bags and sand for your mix.
Do I deduct doors and windows?
Yes. Add up their areas in square metres and enter the total as openings, or you will order bricks for wall that is not there.
Does this calculator design the wall?
No. It counts materials only. Stability, piers, footings and structural design need a qualified person, especially for tall walls.
More in the concrete calculator hub, including block walls, mortar and concrete walls.