Gravel and aggregate for driveways, patios and slab bases. Enter area and compacted depth: get loose volume, tonnage and bulk bags.
Estimates only. Compaction allowance defaults to 1.30 (order 30 percent extra loose material). UK bulk bags are about 850 kg. Confirm tonnage with your supplier.
Gravel and aggregate base calculator
A 20 by 12 ft driveway at 6 inches compacted needs 5.78 cubic yards of loose gravel, which weighs 6.63 tonnes, or 8 bulk bags (850 kg each). The calculator above works out the same figures for any area: enter your length, width and compacted depth, and it returns the compacted volume, the loose order volume with a 1.30 compaction allowance, the weight in tonnes, and the number of bulk bags to buy.
How to use
- Measure the length and width of the area you are covering.
- Enter the compacted depth, meaning the finished depth of the gravel after it has been whacked or rolled flat, not the depth of the loose material you tip in.
- Leave the compaction allowance at 1.30 for mixed gravel and sub base material, or lower it to about 1.15 if you are ordering clean single-size stone that compacts less.
- Adjust the stone density (default 1.5 tonnes per cubic metre) and bulk bag weight (default 850 kg) to match your supplier if their figures differ.
- Optionally add a price per tonne to get an estimated material cost.
Formula
The calculator works in two stages. First it finds the compacted volume:
Compacted volume = Length x Width x Compacted depth
Then it multiplies by the compaction allowance to find how much loose material to order, following the published rule of thumb from Tables and Thyme:
Loose order volume = Compacted volume x 1.30
Weight comes from the crushed stone density published by GravelBase.co.uk (1 cubic metre = 1.5 tonnes):
Weight (tonnes) = Loose cubic metres x 1.5
Bulk bags are the total weight divided by the bag weight, rounded up so you never order short.
Practical tips
- Compact in layers. Spread and compact the gravel in layers of about 50 to 75 mm rather than tipping the full depth at once; you get a firmer, more even base.
- Minimum depth for driveways. Use at least 100 mm (4 inches) of compacted base for a driveway; footpaths and patios can manage 50 to 75 mm depending on ground conditions.
- Add edge restraint. Timber boards, metal edging or kerbs keep gravel from spreading out into the lawn or flowerbeds.
- Lay a weed membrane. A permeable membrane under the gravel stops weeds pushing through and keeps the stone from sinking into soft soil.
- Adjust for stone type. The 1.30 allowance suits mixed gravel and graded sub base with fines. For clean single-size stone, which compacts less, use about 1.15.
Frequently asked questions
How many tonnes is a cubic metre of gravel?
About 1.5 tonnes for crushed stone and sub base, per GravelBase.co.uk. Looser materials such as pea gravel and the moisture content on delivery can shift this figure, so confirm the exact density with your supplier before you pay.
How many bulk bags will I need?
Divide the total weight in tonnes by 0.85 (the weight of one 850 kg bulk bag) and round up. For example, 6.63 tonnes needs 6.63 / 0.85 = 7.8, so 8 bags. UK bulk bags vary by supplier, commonly between 800 and 875 kg, so check the weight on the product listing and adjust the bag weight field above.
Why do I need to order extra gravel?
Loose stone takes up more space than the same stone after compaction. When you whack or roll it flat, air gaps between the stones close up, so the finished compacted layer is thinner than the loose pile you tipped in. Ordering about 30 percent extra (the 1.30 factor) covers this shrinkage so you do not run short.
More in the concrete calculator hub, including driveways and slabs.