Mortar Calculator

Mortar for block walls and brickwork. Enter the unit count: get 80 lb bag count and mortar volume.



Estimates only. One 80 lb bag lays up to 13 standard blocks or 37 standard bricks (Quikrete). Keep a 10 to 15 percent waste margin on top of the calculated bags. Confirm with your supplier.



How much mortar do you need for a block wall or a brickwork project? Here is the direct answer: 90 standard blocks need 7 bags of 80 lb mortar (before any waste margin). Enter your unit count in the calculator above and it works out the bag count and mortar volume instantly, including a waste margin and an optional cost estimate.

How to use the mortar calculator

  1. Enter the number of units. Count the blocks or bricks your wall needs (or estimate them from the wall area).
  2. Select the unit type. Choose standard blocks (8x8x16) or standard bricks, because one bag covers far more bricks than blocks.
  3. Set a waste margin. The default 10 percent covers spillage, dropped mortar and thick joints.
  4. Add a bag price (optional). Enter what you pay per 80 lb bag to get an estimated mortar cost.

The results update live as you type, and the working shows every step of the arithmetic so you can check it.

The mortar formula

The calculator uses one simple formula:

Bags = units / coverage per bag

  • Blocks: bags = units / 13
  • Bricks: bags = units / 37

Coverage figures come from the Quikrete Mason Mix #1136 data sheet: one 80 lb bag lays up to 13 standard 8x8x16 blocks or 37 standard bricks.

Brick note: a standard brick wall with 3/8 in joints needs about 6.55 bricks per ft2. So a 100 ft2 wall needs roughly 655 bricks, which works out at 655 / 37 = 17.7, rounded up to 18 bags of mortar.

Practical tips for ordering mortar

  • Keep a waste margin. Coverage figures are maximums (“up to 13 blocks”) based on tidy joints. Real-world use, thicker joints and retempering usually push the figure higher, so a 10 to 15 percent margin is sensible.
  • Mix small batches. Mortar stiffens as it stands. Mix only what you can lay in about an hour and a half, and keep it workable by remixing rather than adding extra water.
  • Order a little extra. Running out of mortar mid-wall means a second delivery and a possible colour difference between batches. One spare bag is cheaper than a half-finished wall.
  • Confirm with your supplier. This calculator gives estimates only. Bag yields vary between manufacturers, so check the data sheet on the bag you are actually buying.

Mortar calculator FAQs

How many bags of mortar do I need for 100 blocks?

100 blocks / 13 per bag = 7.69, so 8 bags with no waste. With a 10 percent waste margin that becomes 9 bags (110 / 13 = 8.46, rounded up).

Does one bag cover the same number of blocks and bricks?

No. Bricks are much smaller than blocks, so one bag stretches further: up to 13 standard blocks but up to 37 standard bricks per 80 lb bag (Quikrete Mason Mix #1136).

More in the concrete calculator hub, including block walls and poured walls.

Scroll to Top