Concrete Weight Calculator



Weight of concrete by shape: slab, footing, wall, column or stairs. Enter the size and concrete type: get pounds, kilos, tons and slab dead load.



Estimates only. Weights use the standard published densities: 150 lb per ft3 for normal weight concrete and 110 lb per ft3 for lightweight. This is not structural design; support, formwork and lifting decisions need a qualified professional.




Concrete weight calculator

A 20 by 10 ft slab poured 6 inches thick weighs 15,000 lb (6,796 kg, or 7.5 US tons) in normal weight concrete, and it loads the ground or formwork at 75 lb per square foot. The calculator above works out the same figures for any shape: pick slab, footing, wall, square column, round column or stairs, enter the size, choose normal weight or lightweight concrete, and it returns the volume and the weight in pounds, kilos, US tons and tonnes.

How to use

  1. Choose the shape that matches your pour: slab, footing, wall, column, round column or stairs.
  2. Enter the dimensions for that shape. Only the fields for the chosen shape are used.
  3. Choose the concrete type: normal weight (150 lb per ft3, 2,400 kg per m3) or lightweight (110 lb per ft3, 1,760 kg per m3).
  4. Read the weight in pounds and kilos, plus US tons and tonnes for delivery and lifting planning.
  5. For slabs, check the dead load figure in psf (and kg per m2) against what the surface below can carry.

Formula

Weight = Volume x Density. Volume comes from the shape: a slab is length x width x thickness, a round column is pi x radius squared x height, and stairs are worked out step by step, where the steps add up to n(n+1)/2 step blocks for n steps.

Dead load for a slab = thickness in feet x density, so normal weight concrete adds 12.5 psf for every inch of thickness. See also our guide to how much a cubic yard of concrete weighs.

Practical tips

  • Check what carries the load. A 6 in slab weighs 75 psf before anything sits on it. Timber decks, suspended floors and formwork all need that figure checked first.
  • Plan lifting and transport. A single precast step or countertop section can weigh several hundred pounds; use the tonnage figure to size the truck and the lifting help.
  • Lightweight saves about a quarter. At 110 lb per ft3, lightweight concrete weighs roughly 27% less than normal weight for the same volume, which matters on upper floors.
  • Wet concrete weighs the same as cured here. These figures use the standard hardened densities published for each type; fresh concrete is close enough for planning loads and deliveries.
  • Round up for stairs. Stair pours waste more to formwork and spillage, so treat the stairs weight as a minimum and order volume with your usual waste margin.

Frequently asked questions

How much does concrete weigh per cubic foot?

Normal weight concrete weighs 150 lb per cubic foot (2,400 kg per cubic metre). Lightweight concrete weighs about 110 lb per cubic foot (1,760 kg per cubic metre).

How much does a concrete slab weigh?

A 20 by 10 ft slab at 6 in thick is 100 ft3, which weighs 15,000 lb (7.5 US tons) in normal weight concrete. Per square foot, allow 12.5 lb for every inch of thickness.

How much does a round concrete column weigh?

A 12 in diameter column 4 ft high holds 3.14 ft3 and weighs 471 lb in normal weight concrete. The same column in lightweight concrete weighs about 346 lb.

How much do concrete stairs weigh?

A flight 3 ft wide with 11 in treads, 7 in risers and 10 steps is 88.2 ft3. That is 13,234 lb in normal weight concrete, or 9,705 lb in lightweight.

What is the dead load of a 4 inch concrete slab?

50 psf in normal weight concrete: 4 in x 12.5 psf per inch. In metric that is about 244 kg per m2.

More in the concrete calculator hub, including slabs, truck loads and cost.

Scroll to Top