Sealer coverage for concrete. Enter the surface size and coats: get gallons, litres, buckets and cans from per-coat coverage rates.
Estimates only. Coverage varies with surface texture, porosity and weather: check the rate on your product label and adjust the fields above. Seal concrete that is at least 28 days old.
Concrete sealer coverage calculator
An 800 ft2 driveway sealed with 2 coats needs 4.44 gallons of sealer (16.82 litres), which is 1 five gallon bucket. The calculator above works out the same figures for any surface: enter the size, choose 1 or 2 coats, and it returns the gallons per coat and the total in gallons, litres, buckets and cans, using per-coat manufacturer coverage rates you can adjust.
How to use
- Measure the surface length and width in feet.
- Choose 1 or 2 coats. Two coats are recommended for the best protection and appearance.
- Check the coverage rates: the defaults are 300 ft2 per gallon for the first coat (broomed concrete runs 250 to 350) and 450 ft2 per gallon for the second coat (300 to 600).
- Adjust the rates to match your product label and surface condition: porous or rough concrete drinks more sealer.
- Optionally add a price per gallon to get an estimated material cost.
Formula
Gallons = Surface area / Coverage rate per coat, summed across coats.
The first coat soaks in and covers less; the second coat goes further because the surface is already partly sealed. Buckets = total gallons / 5, rounded up.
Practical tips
- Apply two coats. A single coat leaves thin spots that wear through quickly; two coats build a proper barrier against water, UV and automotive fluids.
- Seal at 28 days. Only seal concrete that is at least 28 days old, and keep it clean and dry for 24 hours before and after application.
- Respect the traffic times. Keep foot traffic off for 24 hours and vehicles off for 72 hours after sealing.
- Apply thin. Use a low pressure sprayer or roller and avoid heavy build up; a second coat may be applied once the first is tack free.
- Round up to whole buckets. Running out mid job leaves a visible lap line; it is better to have a little left over.
Frequently asked questions
How much does a gallon of concrete sealer cover?
About 250 to 350 ft2 per gallon on broomed concrete for the first coat, and 300 to 600 ft2 per gallon for the second coat, depending on surface texture and porosity.
How many gallons of sealer for a 2 car driveway?
A 20 by 40 ft (800 ft2) driveway needs about 2.67 gallons for the first coat and 1.78 gallons for the second, 4.44 gallons in total, which is 1 five gallon bucket.
Do I need 1 or 2 coats of concrete sealer?
Two coats. The first coat fills the surface pores and the second builds the protective film; most manufacturers and guides recommend two coats for driveways and patios.
How long after pouring concrete can I seal it?
Wait until the concrete is at least 28 days old so it has cured enough for the sealer to bond properly.
More in the concrete calculator hub, including patios and driveways.