Water capacity and concrete shell volume for a rectangular or cylindrical tank. Enter the inside size and wall thickness, and get litres, gallons and bags.
Planning only. This tool sizes the tank and counts the concrete; septic tank sizing is set by local health rules, so confirm the required size with the authority before you build.
Concrete tank calculator
A 3 by 2 m tank 1.5 m deep with 150 mm walls holds 9,000 litres and needs 3.88 cubic metres of concrete with 10 percent waste, or 229 bags of 80 lb concrete. The calculator above works out the same numbers for any tank: capacity from the inside size, concrete from the outside minus the inside, plus a lid if you fit one.
How to use
- Enter the length, or the diameter for a cylinder.
- For a rectangle, enter the width too. For a cylinder, leave the width blank.
- Enter the depth and the wall and base thickness.
- Tick the lid box if the tank gets a concrete lid, then read the capacity and the bag count.
Formula
Capacity = inside volume; concrete = outside volume minus inside volume, plus lid. A rectangle is length x width x depth; a cylinder is pi x radius squared x depth. One m3 is 1,000 litres, 264.17 US gallons and 219.97 UK gallons. Usable capacity is about 90 percent of brim full, because inlets and overflow pipes sit below the rim.
Practical tips
- Measure the inside, not the outside. Capacity comes from the internal length, width and depth. Wall thickness is added on the outside, so a thick wall eats into the capacity of a fixed outside size.
- Never plan to fill it to the top. Usable capacity is about 90 percent of brim full. Inlets, overflow pipes and the need to avoid spilling all sit below the rim.
- Waterproofing is a separate job. Concrete alone leaks slowly. A tank that holds drinking water needs a proper waterproofing system, not just thick walls.
- Septic sizing is a health rule, not a maths choice. The required septic tank size depends on occupancy and soil, so confirm it with the local authority before you build.
Frequently asked questions
How many litres does my tank hold?
Multiply the inside length, width and depth in metres by 1,000. A 3 by 2 m tank 1.5 m deep holds 9,000 litres at brim full, about 8,100 litres usable.
How much concrete does a tank need?
Outside volume minus inside volume, plus the lid. The example above needs 3.88 m3 with waste, or 229 bags of 80 lb concrete.
Does this tool size a septic tank?
No. It works out the volume of a tank of known size. Septic tank sizing is set by local health rules and depends on occupancy, flow and soil.
Can I use it for a round tank?
Yes. Enter the diameter as the length and leave the width blank, and the tool uses the cylinder formula.
More in the concrete calculator hub, including circular slabs, columns and footings.