Weight, loose volume, dumpster loads and cost for breaking out a concrete slab. Enter the slab size and thickness, and get the tonnage that decides your haulage.
Planning estimate only. This tool does not check for services buried under the slab, and demolition rates and tipping fees vary by region, so use your own quotes.
Concrete removal calculator
A 20 by 20 ft slab at 4 in thick weighs 10 US tons and fills 1 dumpster load at a 10 ton limit, with 7.41 cubic yards of loose rubble. The calculator above works out the same numbers for any slab: weight from volume and density, loose volume from the 1.5 bulking factor, and loads from the weight limit.
How to use
- Enter the slab length and width.
- Enter the slab thickness.
- Tick reinforced if the slab has mesh or rebar in it.
- Pick the haulage limit per load, then add your own demolition and disposal rates to price the job.
Formula
Weight = area x thickness x 150 lb per ft3 (155 lb per ft3 with steel). A 4 in slab weighs 50 lb per ft2 and a 6 in slab 75 lb per ft2. Loose volume = solid volume x 1.5, because broken concrete bulks up. Loads = weight / weight limit per load, rounded up. Cost = area x demolition rate + weight x disposal rate, using the rates you enter.
Practical tips
- Count by weight, not by volume. A 10 yd dumpster looks a third full when a 3 ton concrete load hits its weight limit, and overweight loads get surcharged hard.
- Check for steel first. Mesh or rebar adds 5 lb per ft3 and slows the breaking, so tick the reinforced box or your tonnage and your price will both be short.
- Ask a recycler before a landfill. Clean concrete is usually far cheaper to tip at a recycler than at a landfill, and some take it free.
- Check what is buried underneath. Call before you break: gas, water, electric and drains run under driveways and patios more often than people expect.
Frequently asked questions
How much does a concrete slab weigh?
Plain concrete weighs 150 lb per ft3, so a 4 in slab weighs 50 lb per ft2. A 20 by 20 ft slab at 4 in weighs 10 US tons.
How many dumpsters do I need for a concrete slab?
Divide the weight by the weight limit per load. A 10 ton slab needs 1 load at a 10 ton limit, or 4 loads at a 3 ton limit.
Why is loose rubble more than the solid volume?
Broken concrete does not pack back together: air gaps between the pieces bulk it up to about 1.5 times its solid volume.
How much does concrete removal cost?
Demolition runs about $2 to $6 per ft2 before disposal, and tipping fees vary widely by region. Enter your own quotes above to price your job.
More in the concrete calculator hub, including concrete weight, truck loads and cost.