Polymeric Sand Calculator


Polymeric sand bags for paver joints. Enter the paved area, pick your product and joint width, and get a bag count with waste included.



Materials planning only. Coverage figures are the midpoints of the makers’ published ranges, and the charts assume a 2-3/8 in paver, so check your own bag if you buy a different product.



Polymeric sand calculator

A 12 ft by 16 ft patio with narrow joints needs 3 bags of 50 lb Alliance Gator Maxx G2 sand with 10 percent waste. The calculator above works out the same count for any paved area: area divided by the coverage per bag for your product and joint width, scaled by paver thickness, with waste added.

How to use

  1. Enter the paved length and width in feet or metres.
  2. Pick your product and joint width: narrow joints cover far more area per bag than wide ones.
  3. Enter the paver thickness, usually 2-3/8 in.
  4. Read the bag count and the sand weight.

Formula

Bags = paved area with waste / coverage per bag, scaled by paver thickness. Per 50 lb bag, Sakrete Paver Set covers 50 to 80 sq ft at narrow joints and 20 to 40 sq ft at wide joints, while Alliance Gator Maxx G2 covers 65 to 85 sq ft narrow and 22 to 42 sq ft wide. Maker charts assume a 2-3/8 in paver, so thicker pavers take more sand per sq ft.

Practical tips

  • Fill the full depth. Sweep the sand into the joints to the full depth, to within 1/8 in of the top of the paver. A half filled joint never hardens properly.
  • Sweep dry, then water lightly. Sweep the sand in dry, blow the surface clean, then mist it with water to activate the binder. Too much water washes the binder out and stains the pavers.
  • Keep it dry for 24 hours. After watering, the surface must stay dry for about 24 hours or the sand will wash out and leave a white haze.
  • Wide joints eat sand. A 3/4 in joint takes about three times the sand of a 1/8 in joint per sq ft, so wide joint patios need far more bags than the area suggests.

Frequently asked questions

How much polymeric sand do I need per sq ft?

About 1 lb per sq ft for narrow joints on standard pavers, and about 2 to 3 lb per sq ft for wide joints or thick flagstone.

What is the difference between narrow and wide joints?

Narrow joints are 1/8 in to 3/8 in wide, the normal gap on machine made pavers. Wide joints are 3/4 in to 1-1/4 in, common on flagstone, and they take far more sand per bag.

Can I put polymeric sand over old sand?

Only if the old sand is clean and the joints are full. Rake out loose or weedy sand first, or the new sand will not bond to the joint walls.

What happens if it rains after I water the sand?

Rain before the binder sets washes sand out of the joints and leaves a white residue on the pavers. Check the forecast and keep the patio dry for 24 hours.

More in the concrete calculator hub, including paving slabs, driveway and gravel.

Scroll to Top