Blocks, cap blocks and gravel for segmental block garden walls. Enter the length and height: get courses, block counts, drainage backfill and base pad gravel.
Estimates only. Block sizes are nominal and vary by manufacturer, so check the data sheet for the blocks you buy. This tool covers garden and landscape walls; taller walls, terraced walls and walls carrying loads need engineered design.
Retaining wall block calculator
A 20 ft long wall standing 24 in above ground, built from small blocks with a 12 x 4 in face, needs 7 courses (6 above ground plus 1 buried starter course), which is 140 blocks, or 154 to order with the standard 10% waste margin, plus 20 cap blocks. The gravel comes to 2.31 yd3 (1.77 m3, 2.65 tonnes) across the drainage zone and the base pad. The calculator above works out the same figures for any garden wall: enter the length and the height above ground, pick the block size, and it counts courses, blocks, caps and gravel.
How to use
- Enter the wall length and the height above ground. The buried starter course is added for you, so do not include it in the height.
- Choose the block size: small (12 x 4 in face), medium (16 x 6 in) or large (18 x 8 in). Sizes are nominal; check your product before ordering.
- Leave the gravel backfill width at 12 in, the standard drainage zone behind the blocks, unless your design says otherwise.
- Leave the base gravel thickness at 6 in, the standard compacted pad under the first course.
- Keep the waste margin at 10% for blocks and caps to cover cuts and breakages.
Formula
Blocks = courses x blocks per course. Courses above ground = height / block face height, rounded up. Burial follows the standard rule of 1 in of embedment for every 8 in of wall height, with at least one full course always buried. Blocks per course = wall length / block face length, rounded up, and caps are counted the same way along the top.
Gravel = the drainage zone (wall length x backfill width x full built height, buried courses included) plus the base pad (wall length x pad width x pad thickness), where the pad runs 6 in in front of and 6 in behind the block. For a mortared block wall instead, use the block wall calculator.
Practical tips
- Bury the first course properly. The buried starter course is what keeps the wall from sliding and tipping. Follow the 1 in per 8 in rule and never sit the first course on the surface.
- Level the base pad, not the blocks. A 6 in compacted gravel pad, checked level along its whole length, makes every course after it faster and straighter.
- Keep the drainage zone clean. Fill the 12 in zone behind the blocks with clean drainage gravel as you build, course by course, and keep soil out of it so it keeps draining.
- Order a little extra gravel. The gravel figures are the neat in place volumes. Loose gravel compacts down when placed, so order extra on top, the same as you would for any gravel job.
- Know the height limits. Segmental block garden walls are typically built up to about 4 ft above ground without engineering. Above that, or where the wall holds back a slope, driveway or building, get an engineered design.
Frequently asked questions
How many blocks do I need for a 20 ft retaining wall?
At 24 in above ground with small 12 x 4 in blocks: 7 courses of 20 blocks = 140 blocks, plus 20 cap blocks. Order 154 blocks and 22 caps with a 10% waste margin.
How many courses need to be buried?
At least one full course, always. The embedment rule is 1 in below ground for every 8 in of wall height above it, so a 24 in wall buries 3 in of depth, covered by one 4 in course, while an 8 ft wall buries 12 in, a full 3 courses of small block.
How much gravel goes behind a retaining wall?
A 12 in wide drainage zone running the full built height of the wall. The 20 ft example wall needs 1.73 yd3 in the drainage zone and 0.59 yd3 in its base pad, 2.31 yd3 (2.65 tonnes) in total at 1.5 tonnes per m3.
How many blocks for a 30 ft wall with medium blocks?
At 36 in above ground with 16 x 6 in blocks: 7 courses of 23 blocks = 161 blocks, plus 23 caps, and 4.91 yd3 of gravel. Medium blocks cover the wall in fewer, heavier units.
Is this the same as a block wall calculator?
No. This tool is for dry stacked segmental retaining wall blocks with gravel drainage, no mortar. For a mortared concrete block (CMU) wall with core fill, use the block wall calculator instead.
More in the concrete calculator hub, including block wall, gravel and wall.