Concrete for driveways, aprons and parking pads. Enter length, width and thickness: get cubic yards, bags and cost instantly.
Estimates only. Bag yields per manufacturer specs (80 lb = 0.60 ft3, 60 lb = 0.45 ft3, 40 lb = 0.30 ft3). Ready-mix trucks carry 8 to 10 yd³. Always round up and confirm with your supplier.
How much concrete do I need for a driveway?
A 20 by 12 ft driveway at 4 in thick needs 2.96 cubic yards of concrete (about 134 bags of 80 lb mix), which is roughly 12,000 lb or 5.44 tonnes. With a standard 10 percent waste allowance, order 3.26 cubic yards (147 bags). The calculator above works out your exact driveway from its length, width and thickness, in cubic yards, cubic metres, bags and cost.
How to use the driveway concrete calculator
- Measure the driveway length and width in feet (or metres).
- Pick the slab thickness: 4 in (100 mm) is the practical minimum for cars on firm ground; 5 to 6 in (125 to 150 mm) is recommended for driveways and for anything heavier than a car. Use the thicker end on soft or poorly drained soil.
- Set a waste margin (10 percent is a safe default) and add a price per cubic yard if you want a cost estimate.
- Read off cubic yards, cubic metres, bag counts for every common bag size, weight and truck loads.
Formula
The driveway is treated as a rectangular slab. Volume = Length x Width x Thickness, then divide by 27 to convert cubic feet to cubic yards. For the worked example: 20 ft x 12 ft x (4 in / 12) = 80 ft3, 80 / 27 = 2.96 yd3, and with 10 percent waste: 2.96 x 1.10 = 3.26 yd3. The calculator converts the same volume to cubic metres and bag counts using manufacturer bag yields.
Second worked example: 20×12 ft at 6 in thick
20×12 ft at 6 in = 120 ft³ = 4.44 yd³ (3.40 m³, about 17,800 lb); with 10% waste 4.89 yd³; 200 bags (220 with waste).
Practical tips
- Thickness guidance: 4 in (100 mm) is the practical minimum for cars on firm ground; 5 to 6 in (125 to 150 mm) is recommended for driveways and for anything heavier than a car. Use the thicker end on soft or poorly drained soil.
- Compact the subgrade before you pour. A firm, well compacted base carries the load; a soft base does not, whatever the thickness.
- Put the slab on a compacted gravel base. Our gravel calculator works out the tonnage.
- Plan control joints to manage cracking as the slab cures. Pour in one continuous run where possible so sections cure evenly.
- Reinforce with mesh or rebar for crack control.
- In the UK, driveway thickness is commonly 100 to 150 mm with a compacted sub-base (confirm with local guidance).
- Order ready mix for anything above about 2 cubic yards. Mixing 100 plus bags by hand is slow and the first batches start setting before you finish.
Frequently asked questions
How much concrete do I need for a 20×12 driveway?
At 4 in thick, a 20 by 12 ft driveway needs 2.96 cubic yards (2.27 cubic metres), which is 80 ft3. That is 134 bags of 80 lb mix at exact volume, or 147 bags with a 10 percent waste allowance. It weighs about 12,000 lb (5.44 tonnes).
How thick should a concrete driveway be?
4 in (100 mm) is the practical minimum for cars on firm ground; 5 to 6 in (125 to 150 mm) is recommended for driveways and for anything heavier than a car. Use the thicker end on soft or poorly drained soil.
Should I buy bags or ready mix for a driveway?
Most driveways fall past the point where bags make sense. A 20 by 12 ft driveway at 4 in already needs 134 bags, which would take many hours of mixing and risks uneven curing. Above about 2 cubic yards, ready mix delivered by truck (8 to 10 yd³ per load) is usually the better option. Bags suit small patches and short sections.
More in the concrete calculator hub: concrete cost calculator, concrete bag calculator, slabs and gravel base. See also the driveway thickness guide.