
Concrete vs Cement: What Is the Difference?
Walk into any builders merchant and you will see bags labelled cement stacked next to bags labelled concrete mix. Most people use the two words as if they mean the same thing. They do not, and mixing them up is an expensive mistake.
The short answer: Cement is a fine grey powder that acts as the glue. Concrete is the finished building material made by mixing cement with water, sand and gravel. You buy cement when you want to make concrete, mortar or screed yourself. You never pour cement on its own.
What Is Cement?
Cement is a manufactured powder, and Portland cement is the type used in almost all modern construction. It is made by heating limestone and clay to very high temperatures, then grinding the result into an extremely fine powder with a small amount of gypsum added.
The magic happens when water touches it. A chemical reaction called hydration begins, and the powder turns into a paste that hardens and binds everything around it into a rock hard mass. This is not drying, it is chemistry, which is why concrete hardens even underwater and keeps gaining strength for years.
Portland cement is not a brand name. It is the generic name for this type of cement, coined in early nineteenth century England because the hardened product resembled stone quarried on the Isle of Portland.
What Is Concrete?
Concrete is the finished composite material: cement plus water plus aggregates. The aggregates are sand (fine aggregate) and gravel or crushed stone (coarse aggregate). Cement typically makes up only 10 to 15 percent of the mix by volume. The aggregates provide the bulk and most of the strength, while the cement paste glues it all together.
Think of it like this: cement is the glue, aggregates are the building blocks, and water starts the reaction. Change the proportions and you change the strength, which is why the mix ratio matters so much for structural work.
Where Does Mortar Fit In?
Mortar is the third material people confuse with the other two. It is cement mixed with sand and water, with no coarse aggregate. That makes it smoother and easier to spread, which is exactly what you want for bedding bricks and blocks or pointing joints. Because it has no gravel, mortar is not a substitute for concrete in slabs, footings or anything structural.
Cement vs Concrete vs Mortar: Side by Side
| Cement | Concrete | Mortar | |
|---|---|---|---|
| What it is | Fine grey powder, the binder | Cement, water, sand and gravel combined | Cement, sand and water, no gravel |
| Form when bought | Powder in bags | Dry premix bags, or mixed fresh on site | Powder in bags, or premixed tubs |
| Main job | Glue that binds other materials | Slabs, footings, paths, driveways, foundations | Bricklaying, blockwork, pointing |
| Strength | Useless alone, shrinks and cracks | Very strong in compression | Weaker than concrete, not structural |
| Never use it for | Pouring as a standalone material | Fine detailed finishes, too coarse | Structural slabs or footings |
Why You Cannot Just Pour Cement
Beginners sometimes ask whether they can skip the aggregates and mix cement with water alone. Do not. Neat cement paste shrinks dramatically as it cures, which causes severe cracking. It is also weaker than concrete and more expensive per cubic metre, since cement is the costliest ingredient in the mix. Cement is only ever one ingredient: even a thin repair needs sand, and anything structural needs the full combination.
What to Buy in the UK
UK cement bags follow the European standard BS EN 197-1, and the label tells you exactly what you are getting.
CEM I is Portland cement with 95 to 100 percent clinker and nothing else blended in. A safe choice for any DIY concrete or mortar.
CEM II is Portland composite cement, where part of the clinker is replaced with limestone, fly ash or slag. Most general purpose bags in UK merchants are CEM II types, and they perform perfectly well for DIY concrete, mortar and screed.
You will also see a strength class such as 32.5, 42.5 or 52.5, with N for normal early strength or R for rapid. For general DIY work, a 32.5N or 42.5N bag is ideal.
Which bag do you actually pick up?
- Laying a slab, path or footing: buy general purpose cement (CEM I or CEM II) plus ballast, a premixed blend of sand and gravel, then add water. Or buy ready mixed concrete bags for small jobs. Check quantities with our concrete bag calculator.
- Laying bricks or blocks: buy cement plus building sand to make mortar.
- Screeding a floor: buy cement plus sharp sand.
A 25kg bag of dry material yields about 0.0117 cubic metres of mixed concrete, and a 20kg bag about 0.0094 cubic metres. Always buy 10 percent extra for waste.
For the proportions once you have your materials, our concrete mix ratio calculator works out the exact quantities of cement, sand, gravel and water for your project.
The US Framing: ASTM Types
In the United States, cement follows ASTM C150 instead. The types you will see are Type I (general purpose), Type II (moderate sulphate resistance), Type III (high early strength, handy in cold weather), Type IV (low heat, mainly for dams) and Type V (high sulphate resistance). US concrete comes in 80lb, 60lb and 40lb bags yielding 0.60, 0.45 and 0.30 cubic feet. A handy rule: 45 bags of 80lb premix make one cubic yard.
Quick Bag Arithmetic: A Worked Example
A garden slab 2 metres by 1 metre at 100mm thick: volume = 2 x 1 x 0.10 = 0.2 cubic metres. Add 10 percent waste: 0.22 cubic metres. With 25kg bags: 0.22 / 0.0117 = 18.8, so buy 19 bags. With 20kg bags: 0.22 / 0.0094 = 23.4, so buy 24 bags.
The same job in US units: a 6 ft by 4 ft slab at 4 inches is 24 sq ft x 1/3 ft = 8 cubic feet, plus 10 percent = 8.8 cubic feet. With 80lb bags: 8.8 / 0.60 = 14.7, so 15 bags. With 60lb bags: 8.8 / 0.45 = 19.6, so 20 bags. With 40lb bags: 8.8 / 0.30 = 29.3, so 30 bags.
Which One Do You Actually Need?
- Pouring a slab, footing or path: concrete. Mix your own from cement and ballast, or buy premixed concrete bags.
- Laying bricks or blocks: mortar. Cement plus sand, no gravel.
- Pointing or repointing joints: mortar, usually with a softer sand.
- Levelling a floor: screed. Cement plus sharp sand.
- Setting a fence post: concrete. A post mix or a small batch of site mixed concrete.
- Glueing anything structural with neat cement: never. It will crack.
Frequently Asked Questions
Is cement stronger than concrete?
No. Cement powder has no strength until it reacts with water, and even then neat cement paste is weak and cracks badly. Concrete is far stronger because the sand and gravel skeleton carries the load.
Can I use mortar instead of concrete for a slab?
No. Mortar has no coarse aggregate, so it lacks the internal structure that gives concrete its compressive strength. Always use a proper concrete mix for anything structural.
What does CEM II mean on a UK cement bag?
It means Portland composite cement to BS EN 197-1, with part of the clinker replaced by limestone, fly ash or slag. It is the standard general purpose cement in most UK merchants and fully suitable for DIY concrete and mortar.
Does concrete contain cement?
Yes. Cement is an essential ingredient, usually 10 to 15 percent of the mix by volume, along with water, sand and gravel. Without cement there is no chemical reaction and no hardening.
How long does concrete take to reach full strength?
Concrete reaches about two thirds of its strength in the first week and keeps hardening for at least 28 days, the standard reference age for strength grades. It continues gaining strength slowly for years.
Which bag to buy for the job
| Job | Buy this | Why |
|---|---|---|
| Small slab or repair under 1 m² | Bagged ready-mix concrete | No measuring, just add water. |
| Large slab or footing | Ready-mix truck delivery | Cheaper and far less labour above about 1 cubic yard. |
| Fence post | Post mix or bagged concrete | Sets fast and holds the post. |
| Brick or block laying | Mortar mix | Mortar bonds masonry; concrete is the wrong material here. |
| Countertop | High-strength bagged mix | Finer aggregate and higher cement content for a smooth finish. |
| Floor screed | Sand and cement | Screed is not concrete; it has no coarse aggregate. |
Conclusion
Cement is the ingredient and concrete is the finished material. Remember that one sentence and the merchant shelf stops being confusing: buy cement when making your own mixes, buy concrete mix or ready mix when you want the finished material, and buy mortar materials for brickwork. Match the bag to the job, get the proportions right, and your project will serve you for decades.
Sources
- ACI PRC-211.1-22: Selecting Proportions for Normal-Density and High-Density Concrete
- QUIKRETE: Concrete Mix product data
- Sakrete: High-Strength Concrete Mix product data and yields
About the author
Kaleemullah Formulas use standard geometry and published bag yields; sources are linked in each article.